EC2 cables are the cables using the EC2 connector.
EC2 cable is designed for convenience and reliability performances that allow easiness to grip and with technological advances that enable it to be suitable for current specialized appliances.
And Its flexible design allows mounting, disconnection, and fast set-ups.
- EC2 connector
- Used for replacing broken connectors / creating a custom adapter
- Mass production 5-7 days
- Connector Gender: Female
- Connector Type: EC2
- Wire Length: 10cm / ~4in
- Wire Gauge: 16awg
- Wire Material of Connector: Gold plated copper
An Outline of EC2 Cable
EC2 cable is a male connector attached to a cable or wire hardware. It has exposed, unshielded electrical pins built to insert into a different replaceable connector to allow a smooth flow of physical and electrical connection. It’s also identified as an EC2 plug cable. When disconnected, the unshielded wires are visible.
The EC2 plug cable is a standard connector for headsets, earphones, physical music players, and other electrical appliances. Ideally, they prefer small-built electronics and devices with a low current drawing capacity. The small electronics allow the EC2 cable to fit suitably to enhance good contact that enables the connection. They are built effectively to prevent and reduce short circuits.
EC2 plug cable has a cord length of approximately 10 cm to 30 cm. Its wire gauge is mostly a 16 AWG silicone wire. The EC2 plug cable can hold and allow the current flow between 15A to 20A continuous current.
Moreover, it’s protected efficiently to prevent reverse polarity. The EC2 plug cable is plastically insulated, which helps it resist enemies such as heat, extreme temperatures, and humidity outdoors and is water-resistant.
Additionally, the EC2 cable is designed for convenience and reliability performances that allow easiness to grip and with technological advances that enable it to be suitable for current specialized appliances. Its flexible design allows mounting, disconnection, and fast set-ups.
The cable has several connectors that allow connection to the appliances’ ports at a distance. However, most EC2 plug cables are in different colors for easy identification.
Correct handling of an EC2 cable can prolong its service life and increase its overall performance. You should only use an EC2 plug cable with the identified power source as per its specifications. Not adhering to this could lead to electric shocks that can cause fires.
Minimize using broken, damaged power connectors while using the EC2 plug cables. Additionally, bending, stretched, or power cords entangled with heavy objects should be avoided while using the plug cable.
Ensure the EC2 plug cable is pulled off cautiously during unplugging. Reckless pulling of the plug cable may cause damage both to the appliance and the power cord. Also, avoid using a wet hand while handling the plug cable as this may cause shock or short circuits that could lead to damage.
Ensure that the EC2 cable is correctly inserted and fitted on the appliance during usage. Improper insertion leads to an unstable connection that eventually causes damage. Replace old, frayed plug cables with new ones for efficient performance.
Also, maintain the cleanliness of the EC2 cable by wiping off accumulated specks of dust to prevent fire outbreaks.
EC2 cable is mainly designed to be applicable in small electronics, and incorrect handling and maintenance can lead to heat build-up that would damage both the appliances and the plug cable itself. Moreover, worse cases could cause electric shocks, leading to unimaginable losses. In case an EC2 cable needs to be replaced for another, it’s necessary to consider getting one that meets the OE specifications. For more information, contact us today.